Author |
Topic |
|
Zipgun
USA
521 Posts
Status: offline |
Posted - 28 Aug 2017 : 21:41:20
|
More Factory Strikes Continuing our effort to reduce the supply and fuel available to the DPRK war machine. Our mission this week targets 2 Machine Tool Factories and (if pilots are available) and SCUD-C factory and remnants of the PYongyang Nuclear Plant.
This is a night mission and a weather system has moved in, conditions are inclement at the airfields and poor over the target.
The package will consist of 3 flights: 2 Strike, and 1 Sweep objectives are:
- COWBOY1 Processor and Factory at Taean Heavy Mach Works (STP7) and Kangso Mach Tool (STP8) --Departs from the 912th @ Yeoncheon TO= 1946
- FURY1 Assembly Bldg and Warehouse at the SCUD-C Factory (STP7) and the Transformers at the PYongyang Nuclear Plant (STP-8) --Departs from the 912th @ Yeoncheon TO= 1948
- FALCON1 Provide air cover for the package --Departs from the 911th @ Chongju TO= 1945
COWBOY1 4 ship equipped with GBU-54 L-JDAMs The Weapons Officer has determined that the targets require the following ordinance:
STP7 Processor 3 GBU-54s
Factory 2 GBU-54s
STP8 Processor 3 GBU-54s
Factory 2 GBU-54s
FURY1 4 ship equipped with GBU-54 L-JDAMs ___=== This flight is provided if more than 8 attend ===___ The Weapons Officer has determined that the targets require the following ordinance:
STP7 Assembly Bldg 2 GBU-54s
Warehouse 1 GBU-54
STP8 Transformers (X2) 1 GBU-54 each
Secondary targets should be other structures at the power plant (except reactors) *** Targets are covered by optically aimed AAA ***
FALCON1 4 ship Sweep Air cover/SEAD
SA-11s in the area are believed to be out of supply, but a few AGM-88s should be taken as a precaution
IDM and TACAN are per SOP
------------------------------------------------------------------
Flight Leads in this Sunday's official campaign mission, "TvT 2017 Mission 29" are requested to post a debrief of their flights actions, including any lessons learned or that should be learned by others.
Please put the following information at the top of your post:
Flight Role: (SEAD, ESCORT, STRIKE, Etc..) Callsign11: "Pilot's name" AA=X AG=X RTB,MIA/KIA,EJT Callsign12: "Pilot's name" AA=X AG=X RTB,MIA/KIA,EJT Callsign13: "Pilot's name" AA=X AG=X RTB,MIA/KIA,EJT Callsign14: "Pilot's name" AA=X AG=X RTB,MIA/KIA,EJT
MS/PS/MF
|
|
Zipgun
USA
521 Posts
Status: offline |
Posted - 04 Sep 2017 : 00:17:38
|
Flight Role: SEAD/ESCORT FALCON11: "ZIPGUN" AA=0 AG=2 RTB FALCON12: "VOSENE" AA=0 AG=1 RTB
MS
Measured ingress to let COWBOY close the gap, once they were pending IP point, we split to scan wider and look for emitters. #2 found an UNK and SRCH and engaged both ... the UNK went quiet so the shot missed. #2 reported a pop-up AAA that was too close, so #1 snapped East and engaged the FireCan. When we set up our northern CAP, Lead noticed an SA-10 and moved north to engage and hit the FlapLid. We egressed and did a fun ILS with a side-step. |
|
|
Vosene
United Kingdom
4579 Posts
Status: offline |
Posted - 18 Sep 2017 : 17:38:08
|
Strike
Cowboy11: "Hazza" AA=0 AG=1 RTB Cowboy12: "Echion" AA=0 AG=2 RTB Cowboy13: "Fisty" AA=0 AG=1 RTB Cowboy14: "Veiland" AA=0 AG=3 RTB
MS
|
|
|
|
Topic |
|
|
|
185th VFS |
© 2000-2018 185th VFS |
|
|
|